Inventory

Used 1000 kW Cummins DQFAD Diesel Generator

EPA Tier 2
QST30-G5 engine
Low hours

This generator set is designed in facilities certified to ISO 9001 and manufactured in facilities certified to ISO 9001 or ISO 9002

This generator set is available listed to UL 2200, Stationary Engine Generator Assemblies for all 60 Hz low voltage models. The PowerCommand control is Listed to UL 508 – Category NITW7 for U.S. and Canadian usage. Circuit breaker aseemblies are UL 489 Listed for 100% Continuous operation and also UL 869A Listed Service Equipment.

The Prototype Test Support (PTS) program verifies the performance integrity of the generator set design. Cummins products bearing the PTS symbol meet the prototype test requirements of NFPA 110 for Level 1 systems.

Engine certified to Stationary Emergency U.S. EPA New Source Performance Standards, 40 CFR 60 subpart IIII Tier 2 exhaust emission levels. U.S. applications must be applied per this EPA regulation.

All low voltage models are CSA certified to product class 4215-01.

The generator set package is available certified for seismic application in accordance with the following International Building Code: IBC2000, IBC2003, IBC2006, IBC2009 and IBC2012

Alternator Features:
Low waveform distortion with non-linear loads and fault clearing short-circuit capability with low reactance 2/3 pitch windings
Permanent Magnet Generator (PMG) offers enhanced motor starting and fault clearing short circuit capability
Brushless, 4 pole, drip-proof, revolving field

Engine Features:
Cast iron, V12 cylinder
Direct injection: number 2 diesel fuel, fuel filter, automatic electric fuel shutoff fuel system

Control System:
The PowerCommand electronic control is standard equipment and provides total generator set system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, AmpSentry protection, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance.

NFPA:
The generator set accepts full rated load in a single step accordance with NFPA 110 for Level 1 systems.

This generator set is designed in facilities certified to ISO 9001 and manufactured in facilities certified to ISO 9001 or ISO 9002

This generator set is available listed to UL 2200, Stationary Engine Generator Assemblies for all 60 Hz low voltage models. The PowerCommand control is Listed to UL 508 – Category NITW7 for U.S. and Canadian usage. Circuit breaker aseemblies are UL 489 Listed for 100% Continuous operation and also UL 869A Listed Service Equipment.

The Prototype Test Support (PTS) program verifies the performance integrity of the generator set design. Cummins products bearing the PTS symbol meet the prototype test requirements of NFPA 110 for Level 1 systems.

Engine certified to Stationary Emergency U.S. EPA New Source Performance Standards, 40 CFR 60 subpart IIII Tier 2 exhaust emission levels. U.S. applications must be applied per this EPA regulation.

All low voltage models are CSA certified to product class 4215-01.

The generator set package is available certified for seismic application in accordance with the following International Building Code: IBC2000, IBC2003, IBC2006, IBC2009 and IBC2012

Alternator Features:
Low waveform distortion with non-linear loads and fault clearing short-circuit capability with low reactance 2/3 pitch windings
Permanent Magnet Generator (PMG) offers enhanced motor starting and fault clearing short circuit capability
Brushless, 4 pole, drip-proof, revolving field

Engine Features:
Cast iron, V12 cylinder
Direct injection: number 2 diesel fuel, fuel filter, automatic electric fuel shutoff fuel system

Control System:
The PowerCommand electronic control is standard equipment and provides total generator set system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, AmpSentry protection, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance.

NFPA:
The generator set accepts full rated load in a single step accordance with NFPA 110 for Level 1 systems.

For more information or inquiries, please call or email us at 610-658-3242 or sales@woodstockpower.com

Additionally, you can fill out our Contact Form with your inquiry and our representatives will get right back to you.